1.9KW 2 Stroke Hand-held Demolition Jack Hammer Gas Powered Broken Hammer 1.3L

Description

NOTE: This product is heavy and light, easy to fall in the vertical state, please pay attention to posture to avoid falling and damage the machine, due to falling products damaged, the company does not assume after-sale responsibility. Product key data Engineer type：44mm, Single eylinder, air coling, 2 stroke Fuel:mixing oil(gasoline 25, two-stroke engine oil 1) Fuel tank capacity:1.3L Displacement:52cc Max power and speed:1.9K W/6500r/min Max torque and speed:3.5N.m/5000r/min Consmption rate:≤0.6L/h Impact fregnency:1500Bpm Impact enengy:20-55J Starter system：Hand pull start Net weight :20.5 kg(45.19lb) Dimensions: 690*370*270mm（27.17*14.57*10.63inch） Cylinder diameter * stroke :44×34 mm(1.73×1.34 inches) spark plug model: BM6A
Store category
Sign Up Now !
You may also like
1.9KW 2 Stroke Hand-held Demolition Jack Hammer Gas Powered Broken Hammer 1.3L
Product Description
Item location
CA /NJ /Austell
Brand
Unbranded
MPN
Does Not Apply
Engineer type
44mm, Single eylinder, air coling, 2 stroke
Fuel
mixing oil(gasoline 25, two-stroke engine oil 1)
Fuel tank capacity
1.3L
Displacement
52cc
Max power and speed
1.9K W/6500r/min
Max torque and speed
3.5N.m/5000r/min
Consmption rate
≤0.6L/h
Impact fregnency
1500Bpm
Impact enengy
20-55J
Starter system
Hand pull start
Net weight
20.5 kg(45.19lb)
Dimensions
690*370*270mm（27.17*14.57*10.63inch）
Cylinder diameter * stroke
44×34 mm(1.73×1.34 inches)
spark plug model
BM6A
1.9KW 2 Stroke Hand-held Demolition Jack Hammer Gas Powered Broken Hammer
NOTE:
This product is heavy and light, easy to fall in the vertical state, please pay attention to posture to avoid falling and damage the machine, due to falling products damaged, the company does not assume after-sale responsibility.
Product key data
Engineer type：44mm, Single eylinder, air coling, 2 stroke
Fuel:mixing oil(gasoline 25, two-stroke engine oil 1)
Fuel tank capacity:1.3L
Displacement:52cc
Max power and speed:1.9K W/6500r/min
Max torque and speed:3.5N.m/5000r/min
Consmption rate:≤0.6L/h
Impact fregnency:1500Bpm
Impact enengy:20-55J
Starter system：Hand pull start
Net weight :20.5 kg(45.19lb)
Dimensions: 690*370*270mm（27.17*14.57*10.63inch）
Cylinder diameter * stroke :44×34 mm(1.73×1.34 inches)
spark plug model: BM6A
Main use and feature
Use
I It can use on building construction ,road building project in the broken .
2 Break cormerstone for the railway road and tamp sleepers tamping work .
3 Power embedded in the telecommunications cables broken ditching work
4 Cold water and ice breaking region ,the frozen road digging shovel to clear cutting of destroying
other destroying other strong areas.
Features
1 It is the world's lightest weight , lowest displacement engine type gasoline hammer handheld
2 A perfect body and“V"" linear operation, minmizing the hands of vibration, has significant control of
convenience and comfort, the operator can shovel digging a 360 degree rotation.
3 It can regulate the number of impact energy and impact ,apply for a variety of materials suitable for construction .
4 Applications: Our machine is suit in many kinds of situations ,such as crashing project in road-building ,ectric power , telecom ,tclecom , and cable ,ditch these kinds of crashing work .
5. small size, simple structure, easy operation, durable and beautiful
6. comfortable handle
Anti-slip comfortable handle, anti-slip, anti-loosening, better handle, safer to use
7. cooling ventilation settings
Ventilation around the machine to ensure timely engine heat dissipation
8.chisel speed, high efficiency
Advantage :If you use our machine ,then you can ignore the trouble of diesel engine and pressing machine ,trucking-lorry this kind of heavy equipment, which will not limited by the pipe line , electric line ,cable no matter how high and how far ,we can work situation .
Packing list:
Machine+drill*2+
Proportioning bucket+funnel+filter+small accessories*7
Instruction of safe operation
I. The operator need wear sip-esistant safety shoes. Appropriate clothing. Wear goggles and helmet,
wear earplugs for a long time operation.
2. Balance body when you operation the machine .Operating the machine in a right position.
3. Prohibit smoking when you operate the machine .
4. When you lift machine , the first control you need dial to reach the minimum scale, let the machine
to slow down .
5. Tell idlers away from the work area avoid injury. The process of using machine may lead to gravel
flying to idler.
6. Select medium-speed gasoline hammer to run for the best . Control dial to between 3 to 4 in scale.
7. In the use of operation，the operator is not equal to the greater pressure crushing，stamping,
consolidate faster, try to use the weight of the machine itself , the force should be reasonable in order to achieve high eliciency and easy operation results.
8. Gasoline hammer for crushing, stamping ,solid work，the work can not be used to pry the stone.
9. Maintain the handles dry , clean ,no oil or fuel mixture.
10. Stop the operation midway; you must turm off the engineer.
11. Every time please check normal fastening screws of the connector before use ,if loose ,must
tighten the screws can be used .
12. Prohibition only pure gasoline (without two-stroke engine oil )for fuel .
13. Gasoline is highly flammable, so to refuel in a welll ventilated environment. When you add oil,
please stop gasoline engine.
14. Do not add oil too full ,do not leave the fuel fllere in neck part of machine. If overflow or silld
fuel :wait the fuel all volatilization ,then you can start machine.
15. After refueling ,tighten the oil lid ,Please check frequently whether the damage the fuel tank
leaks ,if found damaged replace immediately.
16. Reserve oil in storage areas , Remove all the root causes of fire or cause sparks.
17. In closed areas ,such as tunnels ,trenches and deep groove in the work environment when using
gasoline hammer to ensure suficient fresh air, exhaust gas containing carbon monoxide
dangers ,should bring electric fan for air flow .
( 18. Forbid quickly aceleratle or brake, so as not to damage the machine.
19. Avoid the impact of fragmentation work against the machine in the context of high speed
operation .
20. Transfer site long-distance transport ,should be emptying the tank .
21. Prohibit substandard maintenance staff dismount gasoline hammer ,1o avoid structural damage to parts , resulting in shortened life of gasoline hammer and accidents .
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On May-26-21 at 23:00:49 PDT, seller added the following information: