FEMALE SPRINGBARS Large 1.2mm End Hole for Vintage Watches 16mm18mm19mm20mm+ NOS

Description

Choose your size.  Each order is for one pair of new old stock vintage spring bars in the size you select.
You will receive a total of 2 spring bars per order.
Measure the width between the lugs and choose from the following sizes:
7mm
8mm
9mm
10mm
11mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
21mm
22mm
These spring bars will fit the lugs opening sizes listed above.  The male lug pins should not factor into your measurement.  Measure fully between the lugs where the male lug pins connect to the lug itself.
Send a message if you have sizing questions.
These are new old stock Swiss made vintage spring bars with large end holes to accommodate vintage watches such as Angelus Chronodato, Universal Geneve Tri-Compax, Rolex, Movado, Heuer, Breitling and many other watches that have male lug pins.
These are not modern female spring bars which have small end holes of 1mm or less that are too small for many vintage watches.  Vintage watches by Angelus, Breitling and Universal Geneve often have male lug pins of 1mm or larger so they need spring bars with larger end holes.  See photos.  These spring bars have large 1.2mm openings for larger male lug pins.  The bodies are steel and the end pieces are brass or steel.  Some springbars may fit multiple lug widths, for example the 19mm and 20mm are the same springbar.  The springbar size you choose is guaranteed to fit a watch with that lug spacing.